iFi – iEMatch

57.02 $

Units Sold: 1

The iFi iEMatch solves the bane of headphone listening by removing hiss and improving dynamics. As most IEMs and headphones are too loud at even half the volume level, listening enjoyment is always curtailed. No more with the iEMatch in the signal path.

SKU: IEMATCH. Category: .

Product Description

The iEMatch® solves the bane of headphone listening by removing hiss and improving dynamics. As most IEMs and headphones are too loud at even half the volume level, listening enjoyment is always curtailed. No more with the iEMatch® in the signal path.

Use the iEMatch® when the headphones/in-ear monitor (IEM) is either too loud and/or there is excessive hiss from the music source. From Smartphones to airplane in-flight entertainment systems, powerful headphone amplifiers, the iEMatch® improves musical enjoyment by:

1. Background noise – significantly reduced
2. Dynamic range – more open, transparent
3. Volume control – increased usable range

The solution? Add the iEMatch® in-between the headphone and the amplifier. Set to high or ultra-sensitivity, sit back and enjoy the music.

 

High or Ultra Sensitivity

When listening to music, ‘better dynamics’ is preferable. Or more precisely, a wider ‘Dynamic Range*’ to allow the full openness of a recording; from the upper treble of a cymbal to the deepest bass rumble of a kettle drum to shine through.
*Defined as the difference between the maximum usable sound level and background noise level. Usually, a higher ‘dynamic range is better’ as there is more music to enjoy and less noise to annoy.

Having very sensitive (very loud) headphones means both the self-noise of the source AND the sound level is boosted. This is far from desirable. And to add insult to injury, the sound volume must be reduced to get comfortable listening levels. What is left is more noise and less dynamic range!

Technical example:

If a source has (say) 114dB dynamic range and the Headphone is 30dB too loud, once the volume has been turned down 30dB the dynamic range is reduced to 84dB, or below CD quality, from what is an excellent result for a high-solution source.
With Headphones, especially those that significantly reduce background noise (IEM, noise-reducing etc) excessive levels of electronic background noise quickly become annoying, so noise should always be kept as low as possible.

It literally defeats the object of building a system around an expensive high-resolution headphone amplifier when the volume must be backed off so much that the resulting background noise is so high, quality is reduced to below CD or MP3 audio quality.

By using iEMatch® one can reclaim 12 or 24dB lost dynamic range; as needed to get the most enjoyment from the source; from modern high-resolution recordings down to MP3, the difference is there to be heard.

 

Balanced or Single-Ended for 3.5mm

AMR/iFi would like to use the iEMatch® to introduce its proposed new industry standard for single-ended or balanced operation. The 3.5 TRRS-Balanced headphone jack.
There is only ONE option that makes sense, in a commonsensical context. The 3.5mm TRRS Jack is widely adopted in Smartphones and connectors, both plugs and sockets are easily available. Having 4 connections (like the 4-pin XLR), it is ideal for balanced headphones.

Headphones may be fitted with TRRS Jack and a switch to alternate between unbalanced mode (even with microphone) for direct connection to a Smartphone and to balanced mode for use with suitably-equipped DAP/DAC/Headphone Amplifiers.

The ‘TRRS-Balanced®’ system by iFi provides a way to select the TRRS plug to offer either a balanced connection or a single-ended one.
The iEMatch® uses 3.5mm TRRS connections on both ends and is fully-balanced, so it takes full advantage of the balanced wiring in suitably-equipped headphones.

If the attached headphone is single-ended without microphone, iEMatch® is automatically converted to unbalanced operation. For any unbalanced source with a microphone connection or any unbalanced headphone with a microphone, simply switch the TRRS-Balanced® selector to ‘SE’ and convert iEMatch® to unbalanced operation.

 

Precision, top-notch components

The iEMatch® is packed using premium components from 6063-TS aluminium –magnesium alloy through to the signal transfer cable which is a 6N silver copper matrix.
The whole is even better than the sum of the parts – it just makes for the most transparent, enjoyment of music.

 

Ready for travelling all over the world

Included in the iEMatch® packgaging are; a velvet pouch, gold-plated airplane adapter and memory-foam contoured ear plugs (-37dB) for peace and quiet when travelling.
We try to think of all scenarios.

 

TECH SPECS

  • Ultra (-24dB)& High-Gain(-12dB) sensitivity adjustment
  • TRRS-Balanced® for Single-Ended and Balanced operation
  • 6N silver/copper matrix wiring with FINAL 6063-T5 aluminium-magnesium alloy shell
  • Gold-plated printed circuit board with audiophile components (eg MELF resistors)
  • Gold-plated 3.5mm male/female connectors
  • Input Impedance: > 16 Ohm
  • Output Impedance: < 2.5 Ohms (High-Sensitivity) < 1 Ohms (Ultra-Sensitivity)
  • Weight: 12.2g
  • Total Length : 116mm

 

User manual

 

 

IMPORTANT NOTICE FOR ALL CUSTOMERS

This product is shipped from Ifi-Audio in UK. International customers are responsible for any VAT and/or customs fees. These are beyond our control and will be based on declared value which is the board cost plus any options.

 

Want to get a 5 to 20% discount on this item? It’s super easy! After your purchase, just write a review and let us know!
More details here.

Additional Information

Weight 0.12 kg
Dimensions 11.6 cm

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Don't have an account? Sign Up