get started

download volumio for your platform

DOWNLOAD
VERSION: 0.979

RELEASE DATE: 20-08-2016
TOTAL DOWNLOADS: 165594

DOWNLOAD
VERSION: 0.976

RELEASE DATE: 28-07-2016
TOTAL DOWNLOADS: 158153

DOWNLOAD
VERSION: 0.976

RELEASE DATE: 28-07-2016
TOTAL DOWNLOADS: 7108

DOWNLOAD
VERSION: 0.981

RELEASE DATE: 25-08-2016
TOTAL DOWNLOADS: 8843

DOWNLOAD
VERSION: 1.5

RELEASE DATE: 30-11-2014

DOWNLOAD
VERSION: 1.5

RELEASE DATE: 30-11-2014

DOWNLOAD
VERSION: 1.5

RELEASE DATE: 30-11-2014

DOWNLOAD
VERSION:

RELEASE DATE:



Volumio,get started, SDcard

FLASH IT

  • Once download has finished, you’ll have a zip file
  • Extract the downloaded zip file and you’ll have a .img image file
  • Download and extract Win32DiskImager
  • Insert the MicroSD Card on your computer, you could use an external card reader or the SD slot if your computer has one.
  • Check that the device name correspond to the microSD card, then browse the files and select choose the image file you want to write.
    To be safe, unplug every External USB Drive you may have connected to your PC
  • When ready click on Write and wait for the process to complete
  • Exit from Win32DiskImageWriter and eject the SD card
  • Done! Volumio is now on your SD Card!

  • Once download has finished, you’ll have a zip file
  • Extract the downloaded zip file and you’ll have a .img image file
  • Download and install Etcher, which will write Volumio to your SD Card
  • Open etcher, and click on “Select Image”. Now select the Volumio .img file
  • Insert the MicroSD Card on your computer, you could use an external card reader or the SD slot if your computer has one.
  • Click on Select drive, and select the SD Card \ SD Card reader.
    To be safe, unplug every External USB Drive you may have connected to your PC and make sure that the device name correspond to the microSD card
  • Click “Continue” and when ready, hit “Flash”
  • When the operation has finished (it may take up to 10 minutes)close Etcher and eject the SD card
  • Done! Volumio is now on your SD Card!

Volumio get started

PREPARE IT

  • Insert the SD Card into the Device
  • Plug the Ethernet Cable
  • Connect the USB DAC, otherwise plug your Audio connection of choice
  • Connect your USB Hard Drive, if any
  • Connect any other device you may want to use (USB HUB, Wi-Fi Dongle, etc.)
  • Power the device on
  • Done!

Volumio pc device

CONNECT TO IT

  • Type volumio.local/ on your Device’s browser (has to be connected to the same Network as Volumio)
  • If you can’t connect to Volumio, just install this or type his IP address
  • Ready! You are now using Volumio’s WebUi. From here you can configure it and control music playback

Volumio WEBui

ENJOY IT

  • Configure Volumio from the WebUi, if you wish to use your NAS as storage
  • Change the parameters as you wish, to tailor your music experience.
  • Sit in your sweet spot. Tune the volume. Relax. This is music.

PROBLEMS?

  • Don’t worry. Even if Volumio is designed to be as straightforwarding as it could be, sometimes things just don’t go as they should.
  • You can read the Documentation or find Help on the Forum

SUPPORT US

GIVE A SMILE TO A DEV, DONATE!