I downloaded the latest Volumio image (version 2.001 dated 15-10-2016), flashed it on a SD card, stuck it in the Pi, plugged in ethernet cable, and fired it up.
I could ping to it, could SSH to it, but could not reach the web UI.
From the SSH interface, I could see that port 80 is not even open.
I tried rebooting, as well as restarting MPD service, but none worked.
Tomorrow I will investigate if there are residual problems on the PI 1… But we’ve extensively tested on it and everything was working…
Thanks for your patience
Aaaah… wait… how much RAM does it have? If it has 256 MB of RAM, then its not going to work… sorry… If that’s the case, an upgrade to PI3 is strongly suggested…
I am having the same problem as well. I wrote the unzipped .img from volumio-2.001-2016-10-15-pi.img.zip to a freshly formatted microSD card.
My system is a Raspberry Pi 2 B+ Model with 1GB memory. It displayed a lot of Linux messages and then showed command line for entering
the UserID and Password. I entered volumio for both. It sat there with no Web UI displayed.
You are meant to see the UI via an external browser, from your phone, pc or tablet. Just type the Volumio ip address (or connect to Volumio network, pw volumio2) and you’ll see the magic…
I did try an external browser, and also verified (via SSH) that port 80 wasn’t opened.
Is there any logs that I can check to see if it attempted to start the web server and what problems it ran into? I see from mpd.conf that logging was commented out. dmesg doesn’t seem to contain anything relevant to this.
Hi, I am experiencing the same problem as described with the lack of web connectivity. This is a Pi3 with a clean install of the latest version of volumio 2.
I did a bit more digging, here’s what happens when trying to start the volumio service by hand. Seems like it can’t read the config file for some reason
volumio@volumio:~$ /usr/local/bin/node /volumio/index.js
info: -------------------------------------------
info: ----- Volumio2 ----
info: -------------------------------------------
info: ----- System startup ----
info: -------------------------------------------
Error reading configuration. Defaulting to empty configuration
info: Found new core plugin music_service/airplay_emulation. Adding it
info: Found new core plugin music_service/mpd. Adding it
info: Found new core plugin music_service/webradio. Adding it
info: Found new core plugin music_service/example_plugin. Adding it
info: Found new core plugin music_service/last_100. Adding it
info: Found new core plugin audio_interface/upnp. Adding it
info: Found new core plugin audio_interface/alsa_controller. Adding it
info: Found new core plugin miscellanea/alarm-clock. Adding it
info: Found new core plugin miscellanea/albumart. Adding it
info: Found new core plugin miscellanea/appearance. Adding it
info: Found new core plugin user_interface/websocket. Adding it
info: Found new core plugin user_interface/mpdemulation. Adding it
info: Found new core plugin system_controller/updater_comm. Adding it
info: Found new core plugin system_controller/network. Adding it
info: Found new core plugin system_controller/networkfs. Adding it
info: Found new core plugin system_controller/services. Adding it
info: Found new core plugin system_controller/system. Adding it
info: Found new core plugin system_controller/i2s_dacs. Adding it
info: Found new core plugin system_controller/volumiodiscovery. Adding it
info: Found new core plugin system_controller/volumio_command_line_client. Adding it
info: Plugin folders cleanup
info: Scanning into folder /volumio/app/plugins/
info: Scanning category audio_interface
info: Scanning category miscellanea
info: Scanning category music_service
info: Scanning category plugins.json
info: Scanning category system_controller
info: Scanning category user_interface
info: Scanning into folder /data/plugins/
info: Plugin folders cleanup completed
info: Loading plugins from folder /volumio/app/plugins/
info: Loading plugins from folder /data/plugins/
info: Loading plugin “system”…
Error reading configuration. Defaulting to empty configuration
No id defined. Creating one
info: Loading plugin “appearance”…
Error reading configuration. Defaulting to empty configuration
info: Loading plugin “network”…
Error reading configuration. Defaulting to empty configuration
info: Loading plugin “services”…
info: Loading plugin “alsa_controller”…
Error reading configuration. Defaulting to empty configuration
info: CoreCommandRouter::volumioUpdateVolumeSettings
info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus
info: Found match in Cards Database: setting mixer PCM for card Audio Jack
info: CoreCommandRouter::volumioUpdateVolumeSettings
info: CoreCommandRouter::volumioUpdateVolumeSettings
info: CoreCommandRouter::volumioUpdateVolumeSettings
info: Loading plugin “volumio_command_line_client”…
info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam
info: Loading plugin “upnp”…
info: [1476786320844] Starting Upmpd Daemon
/volumio/app/plugins/audio_interface/upnp/index.js:138
var name = nameraw.charAt(0).toUpperCase() + nameraw.slice(1);
^
TypeError: Cannot read property ‘charAt’ of undefined
at UpnpInterface.startUpmpdcli (/volumio/app/plugins/audio_interface/upnp/index.js:138:20)
at UpnpInterface.onVolumioStart (/volumio/app/plugins/audio_interface/upnp/index.js:27:7)
at PluginManager.loadPlugin (/volumio/app/pluginmanager.js:122:19)
at PluginManager.loadPlugins (/volumio/app/pluginmanager.js:192:10)
at new CoreCommandRouter (/volumio/app/index.js:43:21)
at Object. (/volumio/index.js:34:21)
at Module._compile (module.js:541:32)
at Object.Module._extensions…js (module.js:550:10)
at Module.load (module.js:458:32)
at tryModuleLoad (module.js:417:12)