Just loaded the Sparky build of volumio.
VERSION: 2.167
RELEASE DATE: 12-05-2017
My setup is : Sparky >>> Kali >>> Piano 2.1
Power to the system is via The Power brick supplying power via kali.
Output from RCA 1 and 2 >> marantz pm6006
Setting in Volumio : Subwoofer output is 2.0
Issues :
- This build doesn’t support dual stereo or dual mono
RCA output : 1 and 2 , i get stereo sound
RCA output : 1 and 4 , Only sound on one channel
RCA output : 3 and 4 , No sound
now the strange part when i change the setting on the amp to direct mode - i get sound only on one channel., this is with the RCA outputs 1 and 2
I tried changing the amp to another onkyo avr sr 608 and same problem, it sounds fine in stereo mode but when i switch to direct i get sound only on one channel.
What can i try next ?
Should i remove the kali and try ? any other pointers ?
i have a raspberry pi 3 as well, should i try installing the same on raspberry pi 3 with kali and piano 2.1 and see if that works