My "Network Soundsystem" :-)

Hello Volumio-friends,

here is my Volumio-Project…
I have implemented all Volumio-plugins (GPIO, Spotify, Touchscreen)
Only a “Multiroom”-function is still missing :frowning:

  • Raspberry Pi 3
  • Class-D-Amplifer TDA 8920
  • Symmetrical power supply 2 x 25V/ 230 VA
  • Volumio Release 2.041

002.jpg

003.jpg

004.jpg

1 Like

Some more pictures …

001.jpg

005.jpg

007.jpg

2 Likes

Looks smart. I really like the case :slight_smile:

Hi,
Great job !

Could you please add more information about DIY kit used (alim, soft power,class d, relay for pre-amp…) ?
Did you also homemade the speakers ?

Thanks in advance

1 Like

Hi,
my English is very bad, but I try … :wink:

Soft-start I haven’t build in, only the Loudspeaker-Protection behind the amplifer I have implemented. I have bought following moduls/parts here:
https://www.amazon.de/gp/product/B01L93TDFO/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B01KPQTW34/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I haven’t build in a Pre-Amp. The Line-In I have controlled with 12Volt Relais, but I will change them in following modul:
https://www.amazon.de/gp/product/B01INDTNKI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

The Loudspeakers are selfmade. The Chassis are from Dayton:
https://www.intertechnik.de/Shop/Lautsprecher-Bausaetze/Bausaetze-mit-Dayton/_BSNeedleRS100_1768,de,6409,53223
bzw. Oaudio:
http://www.oaudio.de/Lautsprecher-Selbstbau/Bausaetze/Subwooferbausaetze/Portokasse-8-Subwoofer-Bausatz.html

At this time I build also new 2-way-systems with SB Acoustics Chassis:
https://www.intertechnik.de/Shop/Lautsprecher-Bausaetze/Bausaetze-mit-SB-Acoustics/_BSSB18_1768,de,6706,53260

The casing I have a little bit redesigned:

008.jpg

1 Like

010.jpg

Fantástic! You can upload a block diagram and genéric wired forma this?
Regards

hello
looks nice,
is it possible to use the touchscreen?
I am asking because you have also the button with next start stop

do you have a picture on your frontpanel?

have a nice day
vinc

Hi, these are the power supplies you use for the Raspberry Pi and the lcd panel?

ebay.com/itm/AC-110V-220V-TO … q5l5lWNUMg

Regards

Hi,
look here:
amazon.de/Schaltnetzteil-LE … ll+rs-15-5

MeanWell, RS-15-5

@vinc
I can use the Touchscreen and I can use the button.
The buttons are more comfortable

@danielfelix
I can create a block diagram, but it takes a few days.

Regards
Claus :slight_smile:

Thank you! I wait for the diagram, there is no rush.

Regards

Hi daniel,

here is the block-diagram…

soundsystem-blockdiagram.jpg

Thanks Claus65, You have been very kind, will guide me to build my own project.
Best regards.

Daniel

WOW,

great project an very nice woodworking.

make a bow

H. Steam

Servus Claus,

kannst du mich bitte mal kontaktieren?

How did you implement the switches for Play, Stop etc?

Hello Claus65,

Great job ! Looks beatyful.

Can you give me link to lcd that You used ?

Thank you.

God, this case looks so cool. The wood texture is great, it looks quite minimalistic. I saw something similar on YouTube, only there a guy made a case for his pc, I got interested in that idea and decided to do it. After buying the boards, it turned out that they were uneven, and the case would be bad. I could not do without a planer, so I had to splurge on the best benchtop jointer(<spam link removed>). I ended up with a good case, one side I left glass so that the RGB illumination could be seen. And by the way, contrary to my expectations, the components do not heat up at all.

1 Like