Installing the Touch Display plugin

Get help for Volumio here!

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.

Installing the Touch Display plugin

Postby DARKHalf » Fri Mar 10 2017 11:37

I'm not sure but the packages raspberrypi-kernel and raspberrypi-bootloader are required by libraspberrypi0 which is a dependency of chromium package.

If you pin and hold both packages, will libraspberrypi0 be installed? In my tries it refused to install in case of missing dependencies.
So i could not install chromium.
Random avatar
DARKHalf
Sunday DIYer
Sunday DIYer
 
Posts: 20
Joined: Tue Mar 10 2015 12:34

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.


Installing the Touch Display plugin

Postby macmpi » Fri Mar 10 2017 13:04

No, with the held packages, libraspberrypi0 won't be installed either, but install procedure will not complain about it either (it's a firmware update you don't want anyway, as it would break distribution).
Then the only dependencies problems reported are those described in post #p29708, which I resolved as explained in that post.
From there, plugin install does not fail and Pi boots normally.

Just the plugin does not fully work yet in my case due to X failing to start: maybe it's a HDMI-specific issue as I do not use DSI port-based screen.
Maybe it's fine for 7″ Touchscreen Monitor which this plugin is initially intended for?
So not completely resolved yet for me, but should be very close now...
Any idea for the X thing?
New User? Welcome! Please allow 8mn for first boot, and while the wait, be sure to carefully read Quick-start instructions and FAQ ;)
Question? please use search form first, and if posting for a problem, submit logs.
User avatar
macmpi
Objectivist
Objectivist
 
Posts: 393
Joined: Tue Jan 12 2016 11:19


Installing the Touch Display plugin

Postby macmpi » Fri Mar 10 2017 22:36

The X.org issue may be due to recent packages: there are few articles about that.
So tried to work backwards and find older dependencies which may work (would be interesting to check with X library versions on working 2.041).
The only thing I could get to was to sequentially
Code: Select all
sudo apt-get install xserver-xorg-core=2:1.16.4-1
sudo apt-get install xserver-xorg-input-evdev=1:2.9.0-2
sudo apt-get install xserver-xorg=1:7.7+7+b1
sudo apt-get install xorg=1:7.7+7+b1
and then mark them hold, before installing the plugin (which installed fine). However x session did not work either.
I leave it here in case someone has more success in finding-out this last bit.
New User? Welcome! Please allow 8mn for first boot, and while the wait, be sure to carefully read Quick-start instructions and FAQ ;)
Question? please use search form first, and if posting for a problem, submit logs.
User avatar
macmpi
Objectivist
Objectivist
 
Posts: 393
Joined: Tue Jan 12 2016 11:19


Installing the Touch Display plugin

Postby michelangelo » Sat Mar 11 2017 04:23

I've just updated the plugin zip. Now the installation should work and your volumio will survive...
Please, for the braves, let me know how it goes ;)
User avatar
michelangelo
Founder
 
Posts: 3835
Joined: Sun Dec 15 2013 23:18


Installing the Touch Display plugin

Postby sputnikk » Sat Mar 11 2017 13:34

thanks for your job its working !! from a clean start its ok.
note : the screensaver settings are not ok on the volumiokiosk.sh file
the "dpms" parameter is missing, i've replace "xset 0 0 120" by "xset dpms 0 0 120"
Random avatar
sputnikk
Fresh off the boat
Fresh off the boat
 
Posts: 9
Joined: Tue Jan 03 2017 12:22


Installing the Touch Display plugin

Postby tjm. » Sat Mar 11 2017 14:12

I just installed Volumio on a Raspberry Pi Zero W with Waveshare 5" display. The plugin works, but I'm missing the possibility to change resolution etc., I needed to do this manually.

t
Random avatar
tjm.
Fresh off the boat
Fresh off the boat
 
Posts: 1
Joined: Sat Mar 11 2017 14:11


Installing the Touch Display plugin

Postby Claus65 » Sat Mar 11 2017 14:45

Thank you very much! The plugin works fine!

- Volumio Version: 2.118
- Raspberry Pi 3
- 7 Zoll Raspberry Display

Unfortunately the German language pack does not work.
Random avatar
Claus65
Sunday DIYer
Sunday DIYer
 
Posts: 10
Joined: Sat Jan 28 2017 21:49
Location: Germany


Installing the Touch Display plugin

Postby Claus65 » Sat Mar 11 2017 15:56

I noticed something else ...
The screensaver is not disabled. After a few minutes I have a black display.
Random avatar
Claus65
Sunday DIYer
Sunday DIYer
 
Posts: 10
Joined: Sat Jan 28 2017 21:49
Location: Germany


Installing the Touch Display plugin

Postby Blebbens » Sat Mar 11 2017 16:02

After flashing my sd card several times, I tried to use volumio 2.118 for installing the touch ui plugin (RPi3/RPi Touch screen 7").

But, it always stop at 70% and is asking for a keyboard layout from 1-21.

Is there a easy work around for this?
Dpkg --configure -a does not show any way around.
Random avatar
Blebbens
Sunday DIYer
Sunday DIYer
 
Posts: 12
Joined: Tue Mar 07 2017 19:14


Installing the Touch Display plugin

Postby macmpi » Sat Mar 11 2017 16:57

Code: Select all
sudo apt-get install keyboard-configuration
before installing the plugin
New User? Welcome! Please allow 8mn for first boot, and while the wait, be sure to carefully read Quick-start instructions and FAQ ;)
Question? please use search form first, and if posting for a problem, submit logs.
User avatar
macmpi
Objectivist
Objectivist
 
Posts: 393
Joined: Tue Jan 12 2016 11:19

PreviousNext

Return to Help

Who is online

Users browsing this forum: No registered users and 1 guest