HifiBerry DIGI and Raspberry 2

Diy? Low-budget? Esoterics? Let's discuss about DACS!

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.

HifiBerry DIGI and Raspberry 2

Postby nico11111 » Tue Jan 26 2016 08:06

Hi,
If you want to use an "old" Hifiberry DIGI" (not DIGI+) with a Raspberry 2 (or B+, I think), you have to connect SDI interface ((pins 2,4,12, 35, 39, 40 of Raspberry 2) and I2C (pins 4 and 6). If you don't connect I2C, the DIGI is not detected.

I will put a photo later.
regards
Random avatar
nico11111
Sunday DIYer
Sunday DIYer
 
Posts: 17
Joined: Tue Dec 01 2015 08:49

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.


HifiBerry DIGI and Raspberry 2

Postby Rene230781 » Tue Feb 16 2016 07:55

Hi Nico,

Can you port pictures? I actually got a Digi (not digi+) and .a Raspberry 2.

I found the following pinout in another forum but seem not to work or only noise instead of audio.

Anschluß Rev. B+
-----------------

P1:
3: SDA grün -> 3
5: SCL gelb -> 5

P5:
1: +5V rot -> 2
2: +3.3V orange -> 1
3: BCLK lila -> 12
4: WCLK grau -> 35
5: DOUT n.c. -> 38
6: DIN weiß -> 40
7: Gnd
8: Gnd schwarz -> 6


René
Random avatar
Rene230781
Fresh off the boat
Fresh off the boat
 
Posts: 2
Joined: Tue Feb 16 2016 07:52


HifiBerry DIGI and Raspberry 2

Postby Rene230781 » Wed Feb 17 2016 09:26

Ok Got it working: Here is the solution!

Image
Random avatar
Rene230781
Fresh off the boat
Fresh off the boat
 
Posts: 2
Joined: Tue Feb 16 2016 07:52


Return to DACs

Who is online

Users browsing this forum: No registered users and 0 guests