failure to start DHCP server

Help and Support Help
1

I’m trying a second time to load Volumio onto a raspi B+.
I downloaded a fresh image and booted the raspi. Volumio installs (version 2) but there is an error message on start up.

[FAILED] Failed to start LSB: DHCP server
see ‘systemctl status isc-dhcp-server.service’ for details

I logged in to the root, and ran the command “systemctl status isc-dhcp-server.service” it resulted in the following message:

no subnet declaration for eth0 (192.168.1.9)

  • ignoring requests on eth0. If this is not what
    you want, please write a subnet declaration in your dhcpd.conf file for the network segment
    Failed to start LSB: DCHP server
    unit isc-dhcp-server.wervice entered failed state

note: I can ping the ip address (192.168.1.9) from elsewhere on the network with no problem
note: the system also recognizes the wireless adapter hardware but does not start a wlan0 process

any idea why this failure might be occurring?

2

Exactly the same problem with my brand new Rpi3b.
When connected with the Ethernet cable and using the IP address rather than volumio.local, I could play web radios but nothing else.
With the Wifi, I can just see the web interface and that’s it.
Any advice is welcome.

3

Same here with my Rasp2b… Definitely need some help.
Thanks:)

4

Same here…

Unable to get up from DHCP server from my router

Enviado do meu SM-G920F através de Tapatalk

5

Same here any news on this?

6

Don’t bother this error message, it’s harmless. Plus what you need is a dhcp client, not a server.
We should have fixed the issue causing this particular offending behaviour, a new image will be out soon hopefully